Do you think MoUSO Core Worker Process is running on your system without your knowledge? To begin with, one of the major indications of the MoUSOCoreworker.exe program is that it does not let your laptop go into sleep mode. In the event that your laptop goes to sleep mode somehow, eventually, it will awake automatically. Because MoUSOCore.Exe does not interpret any information to the user, it is often challenging to figure out what’s going on!
Other indications that may interpret that the MoUSO Core worker process is running on your PC are:
- High disk usage
- Declined storage capacity out of the blue
- Your PC takes 3-5 times higher than before while starting up.
- High CPU usage
- Overheating hardware
- Persistent fan noise, starting up
- Slow performance rate
For the most part, because the above signs can also point towards any type of other computer issues, thus, today we brought you a concise instructional guide on the MoUSO Core worker progress program. And, how to disable it?
But, before we go ahead and countdown mechanisms to affix this startup program issue on PC, let’s learn about the MoUSO Core worker process and how it works?
What is the MoUSO Core Worker Process or MoUSOCoreWorker.exe program?
To begin with, MoUSO Core Worker Process is a configuring startup program in the Windows operating systems. A startup program, by definition, is a patterned program that starts up automatically when the user turns on the computer system. According to the research, the MoUSOCoreWorker.exe program remains “enabled” in every Windows PC by default. Unless, of course, the user disables it by choice.
However, why would you want to disable this startup program? Here’s your answer: when the MoUSOCoreWorker.exe program runs in the background, it stops your PC from going into sleep mode. Why? Let’s find out:
Explanation: Why can’t my PC go to sleep mode?
MoUSO Core Worker Process, a startup program, acts as a mainstream examiner of new updates available for one’s PC. For example, when you open your PC and quickly a notification pops on the screen, “a new software update is available.” It means that the MoUSO Core Worker Process has done its job correctly.
However, let’s suppose that when you turn on your PC, for some reason, the MoUSOCoreWorker.exe program starts up. But, it is unable to examine new updates available. In that case, the program will keep running even if it fails each time. As a result, it does not let your PC go to sleep.
In the event that your computer shows an indication of MoUSO Core worker process high CPU usage or high disk usage, it means that the MoUSOCoreWorker.exe file is unable to process new software updates due to connectivity issues. Henceforth, every time, the startup program collapses. And, it restarts the procedure, which takes up a lot of disk memory as well as CPU power.
More often than not, users complain that the MoUSOCoreWorker.exe file keeps running even if the computer’s operating system is up to date. Now, one of the major reasons for that to happen is that the MoUSO Core Worker process has concluded new data/updates concerning applications installed on your PC. But, because this application data is unable to synchronize, the MoUSO Core worker process keeps collapsing.
What to do?
Are you running out of patience to deal with the MoUSO Core worker process error? If yes, then it is time to take action and resolve this error from recurring. How? Scroll down to find out how to disable the MoUSOCoreworker.exe program?
Before going ahead, let’s take a glance at several reasons why this program keeps collapsing and restarting:
- The computer is unable to synchronize applications data.
- Update Software Orchestrator service is currently running on your PC.
- You have updated your PC’s operating system, which is not supportive as per its hardware standards.
- Hidden/unknown files and folders on your PC contain corrupted data, uncleared cache, and unsupportive files/folders/apps.
- The task manager is triggering MoUSOCoreWorker.exe to run whenever the computer starts up (set by default).
- The last time you “Reset settings” on your PC, it misconfigured a few settings that may be causing the issue.
- Too many startup programs running at once.
MoUSOCoreWorker.exe preventing sleep error? Here are the top solutions to fix it!
One of the major downsides of the MoUSO Core Worker Process running on your PC is that it prevents computers from sleeping. Thus, each time you take a break from work on PC, you will either be required to shut it down or keep it awake. In the short term, this may not be a problem. However, in the long-term, this can cause your PC to run into major issues like low performance, fan noise, overheating issues, high disk usage, low storage capacity, quick battery drainage, and whatnot!
Following are some true and tried mechanisms to fix MoUSOCoreWorker.exe preventing sleep error. Let’s take a glance:
Figure out the problem first!
In the past, users have tried shutting down the MoUSOCoreWorker.exe program. However, they complained that it did not work for them. Why? It is possible that for these users, the MoUSO Core worker process is not the main problem. Is there a way to find out? The answer is yes. Here’s how:
- To begin with, the process, access the command prompt (.cmd).
- To do so, press: Control+Shift+Enter keys in the “run (best match)” box from the Windows Main Menu.
- When the screen goes black, enter the first command, “powercfg/systemsleepdiagnostic.” (It means power configuration/ system sleep diagnostic.) The computer will run diagnoses on its sleep mode issues.
- Once you press the ENTER key, the “Execution” subheading will appear on the screen below the first command.
- Now, under execution, if it says “usocoreworker.exe.” Then yes, MoUSOCoreWorker.exe is responsible for preventing your PC from going to sleep mode.
In the event that error execution does not mention “usocoreworker.exe,” then it is possible your PC has other issues. Visit the nearest service store.
Bonus solution: Turn off your PC using the power button. Tap it for 10 seconds until the screen goes black. Further ahead, wait a few seconds before you turn it ON again. If MoUSO Core Worker Process is a one-time error, then you are fine. You do not need to go through other solutions. In the event that the sleep mode issue recurs, the following tricks will help you.
#Method 1: Turn off USO Startup program in Services
More often than not, when a MoUSO Core worker process kickstarts, it informs the USO (Update Software Orchestrator) regarding new updates. Now, if the USO has been set to “Automatic,” you will notice that apps on your PC start upgrading automatically. Henceforth, in order to synchronize data again, MoUSOCoreWorker.exe prevents your PC from sleeping. Or, in some cases, it wakes the computer from sleep mode.
There’s one solution to this – turn off the USO program. Here’s how:
- To begin with the process, please make certain that all applications are closed and not synchronizing any form of data.
- Tap on the Windows key to access the Start Menu.
- In the bottom box, type “SERVICES.”
- Under the best match, right-click on the “services” program.
- Pick the “run as administrator” alternative from the dropdown menu.
- From the list of all startup services programs, scroll down to USO.
- Again right-click on the Update Software Orchestrator service, and click on the “STOP” alternative.
In order to stop USO from running again accidentally or mistakenly, disable it. Here’s how:
- Right-click on the USO and scroll the cursor down to “properties.”
- Navigate to the general tab and lookout for the “Startup type” heading.
- Ahead of this heading, click on the “arrow.”
- From the dropdown menu, select “Disabled.”
- Tap on the “Apply” button and then, OK.
For best results, restart your computer.
Note: Because of Microsoft’s latest privacy and security guidelines, USO or Update Software Orchestrator service local host enables itself after a period of time. Thus, it is only a temporary solution. But, if you are in the middle of a crucial task at work, turning off USO can help a lot.
#Method 2: Get rid of unwanted applications/programs
Does your computer show signs of high disk usage, memory, and CPU usage? In that scenario, it is quite predictable that your PC has loaded with multiple applications that are running for no good reason. One of the best and most linient ways to keep a PC’s performance level stable is by keeping it clean.
Apart from this, when your PC has too many applications installed, MoUSOCoreWorker.exe has to run again and again to check for updates. Even if you do not update these apps. So, it is best to get rid of them. Here’s a guide for you:
- Tap the Windows key to quickly access the Start Menu.
- Next, navigate to the “Settings” alternative.
- Look out for the “Apps” option.
- In the App’s main menu, observe for apps that persistently sync data.
- Now, select the App that you want to delete.
- It will expand with new options.
- Select the “Uninstall” button provided on the bottom.
- Uninstall procedure will start.
We strongly recommend you repeat this process until your PC is free of all the unwanted, unused, and ineffective applications.
To prevent the safety and security of your computer system, you must uninstall apps that are downloaded from unknown websites. It can be a virus or malware.
#Method 3: Update your PC’s software to the latest as MoUSO Core worker process demands
One of the major reasons why the MoUSO Core Worker Process keeps collapsing and reprocessing on your PC is – incompatibility. For example, if you are using an old version of the Windows Operating System, it will not support applications with the latest technical requirements. As a result, these apps are bound to collect corrupt data and temporary files. Further ahead, it interrupts synchronization.
And soon enough, your PC’s entire performance level drops down to 30%. Do you know? The MoUSO Core worker.exe program alone uses 70% of the resources on your PC to check for updates. With such statistics in knowledge, it is best to take some hours out of a busy schedule and upgrade Windows OS to recuperate its performance capacity.
- Tap the Windows key to quickly access the Start Menu.
- Next, navigate to the “Settings” alternative.
- Look out for the “System settings” option.
- Select the “Check for Updates” alternative provided below.
- Click on the “Download” and “Install” alternative to begin the process.
- It will take a while, so sit back and relax.
- Make certain the internet connection is stable.
- The updated version is supportive of your PC’s Intel processor and GPU type.
- Prevent the PC from going into sleeping mode as it will interrupt the process.
- Ensure that your PC is at least 50% charged. Or connect it to a power source immediately.
#Method 4: MoUSO Core Worker Process? Disable Generic USB Hub
Hardware malfunctioning is one of the most common leads that triggers MoUSO Core Worker process error. For instance, if you have recently downloaded the latest version of the Generic USB Hub driver, it is possible that the driver is incompatible with the actual USB portal.
As a result, each time you put your computer to sleep, the MoUSOCoreWorker.exe program starts to find a new update for the USB hub, which is compatible. Because it does not find a new update for the driver right away, it collapses and restarts. To protect the MoUSO from restarting again, here’s how to disable the USB Hub update for the time being.
- Head to the Device Manager program on your PC.
- In the device manager main menu, scroll down to find the “USB Controller” alternative. It allows your PC to connect with external accessories via a USB cable or portal.
- Click on the USB controller option twice to expand it.
- Navigate to the “Generic USB Hub” alternative in the dropdown menu and select it.
- Now, right-click and open the “properties” option.
- Do you see an option called “Power Management?”
- Now, under the power management section, there’s a box ahead of “Allow the computer to turn off this device to save power/battery.”
- Tick the box.
- Click on the “APPLY” button to confirm settings.
- Now, restart your PC.
Once you disable USB Generic Hub, you may not be able to attach any external accessories to your PC. In order to do so, reverse this procedure.
#Method 5: Override MoUSO Core Worker Process
Presuming that MoUSOCoreWorker.exe is preventing your PC from charging without sleep mode can be troublesome. Even though you cannot disable the moUSOCoreWorker.exe program from examining your PC forever, you can surely do, till the time it is fully charged. This will also allow the motherboard and CPU to cool down. Henceforth, preventing any overheating impacts in the future. Here’s how to override the MoUSO program:
- Access the command prompt via typing “.cmd” in the search box.
- Run Command Prompt program as administrator.
- Once your screen is black, you may enter the command given below:
powercfg /requestsoverride process MoUsoCoreWorker.exe execution
It will take a few seconds to wind up the override request. Once it’s done, RE-operate your PC.
OR, you can also “end task” for the moUSOCoreWorker.exe program in task manager.
In the bottom line, we would like to inform readers that the MoUSOCoreWorker Process is not a harmful program. It is a program enabled by default by developers in order to protect users’ interest in the latest technology and upcoming new features in Windows. Many consider it a virus or malware and search for methods to delete it. However, it’s not an option!
If the MoUSO Core Worker Process is bothering you repeatedly, it is best to upgrade your system software. Otherwise, it’s a conflict of interest between you and the program.
For more information on the subject and new updates, mark us as your fav! Thank you.